news center

News Center

the latest industry news, all the knowledge about oil fume purifiers

what is the reason for the fume purifier flashing

release time: 2024-02-15 15:59:58浏览人数:249

8000m³/h · zhiyun oil fume purifier

weiton was established in 2019 and was approved by the environmental protection bureau, industrial and commercial bureau, and qichacha.
regularity is guaranteed. confidential information, standard fume purification >receive a 30-day free offer

fume purifierwhat's the reason for flashing

flashing of the fume purifier may be caused by a variety of reasons, including but not limited to the following:

1. the oil fume purifier controller has a failure, such as aging and missing components.
2. the internal short circuit of the purifier electric field may cause the working state of the power protection. it is necessary to check whether the electric field insulating ceramic is damaged, clean the purifier electric field to remove impurities, and at the same time check whether the electric field plate is regular and parallel, or check whether the stainless steel serrated teeth are falling off or damaged.
3. the protection board inside the power supply is broken, or some power supplies need protection sensitivity settings, and similar situations may occur in the critical state (generally, there are many old-style power supplies).
4. poor contact between the circuit board and the case or poor contact with the wire connector, resulting in a short circuit of the circuit.
5. the circuit board damage may be affected by mechanical, thermal, electrical and other factors, and may easily cause aging, corrosion and other problems, resulting in system abnormalities.
6. excessive humidity inside the fume purifier or excessive power supply temperature may also cause the device to flicker, but this is relatively rare.

to determine the specific cause, you may need to contact a professional maintenance staff for examination and diagnosis. please note that during inspection and repair, be sure to ensure that the equipment is powered off to avoid the risk of electric shock.

reasons why the red light of the high-voltage power supply of the oil fume purifier keeps flashing

reasons why the red light of the high-voltage power supply of the oil fume purifier keeps flashing
easy check from:
first, short circuit occurs in the power core, that is, the electric field, causing the power protection working state, check whether the electric field insulating ceramics inside are damaged, clean the electric field of the purifier, remove impurities, and check whether the electric field of the core is parallel to the plate (plate type electric field) or discharged. is the round rod and the cylinder concentric (honeycomb electric field), or check whether the tungsten wire or the stainless steel wire molybdenum wire that is discharged from the wire plate is burned (wire plate discharge). this is more common.
second, is the humidity inside the electric field purifier too high and the power supply temperature is too high. (this situation is less)
third, the protection board inside the power supply is broken, or some power supplies need protection sensitivity settings, and the setting in the zero-boundary state will also be the case (generally, there are many old-style power supplies).
fourth, other power supply problems, including high-voltage packs and other material problems (this case is less likely)

do you know the routine operation of the red light of the oil fume purifier flashing all the time?

catering oil fume purifier refers to oil fume purifier used in the catering industry. using the dual functions of mechanical separation and electrostatic purification, the oil fume exhaust gas is suctioned into the pipeline under the action of the fan to separate and purify large-sized oil mist particles. the most common reason why the red light of the oil fume purification equipment flashes is red. common problems: 1. the oil fume purification equipment needs to be cleaned, and the oil and dirt inside the electric field is thicker. 2. check whether the power supply is malfunctioning.

3.the electric field is not dried, causing abnormal ignition of the electric field. if water droplets remain after the electric field cleaning of the oil fume purifier, it will cause the distance between the electric field plates to become smaller, causing ignition, accompanied by the "slap" discharge sound. after the electric field is cleaned, it should be completely allowed to dry before it can be placed in the equipment. use. 4. bending deformation occurs when cleaning the electric field electrode plate. this reason can easily cause continuous ignition and is accompanied by the sound of "slap"; when cleaning the electric field, use soft cleaning and soak it in warm water with special cleaning agent for 20% ~30in minutes, when flushing the water gun, do not flush perpendicular to the electric field plate. since the electric field plate is an aluminum plate, it is easy to cause deformation due to external forces. 5. the electric field is not cleaned, resulting in the electric field being ignited incorrectly. after soaking and cleaning the electric field, dry it. before putting it into the equipment, carefully check whether there are any debris or unclean cleaning in the electric field. 6. the power supply is damaged. if, after cleaning the electric field, it is confirmed that there is no debris in the power plant and has been dried and the electric field plate has not been deformed, you need to check whether the power supply is damaged! if the power supply is damaged, contact the manufacturer for after-sales service to repair or replace the power supply!

the plasma fume processor fault light flashes nine times

a short circuit fault occurred in the electric field of the oil fume purifier. the plasma fume processor is designed based on the principle of low-temperature plasma purification and mechanical centrifugal principles. when the product is used for too long, a short circuit failure occurs in the electric field of the fume purifier, resulting in poor operating status of the power protection and flashing indicator light. at the same time, check whether the electric field insulating layer of porcelain inside is destroyed, clean the electric field of the purifier, and eliminate residue. oil fume processor refers to the treatment device of oil fume exhaust gas.

what is the reason why the work indicator and cleaning indicator light of the barbecue truck purifier are on and blinking?

what is the reason if the power indicator light flashes during the use of the fume purifier? below, the editor will rule out the reasons why the indicator light of the fume purifier is flashing.

first, a short circuit occurs in the electric field of the oil fume purifier, causing the working state of the power protection. check whether the electric field insulating ceramics inside are damaged, clean the electric field of the purifier, remove impurities, check whether the electric field plate is regular and parallel, or check whether the stainless steel serration is falling off or damaged.

second, is the humidity inside the electric field purifier too high and the power supply temperature is too high. (this situation is less)

third, the protection board inside the power supply is broken, or some power supplies need protection sensitivity settings, and the setting in the zero-boundary state will also be the case (generally, there are many old-style power supplies).

fourth, other power supply problems, including high-voltage packs and other material problems (this case is less likely)

visually smoke-free·through environmental protection·direct sales by manufacturers

professional, safe and reliable, solving kitchen fume problems

label:


Baidu
map